Shop

part# TP9KFX Tuxedo

9000lb post floor plate

$3,300

Lift Model TP9KFX

Capacity 9,000 lbs.

Height Overall 111-7/8″

Width Overall w/ Power Unit 134-58″

Max Lift Height 72″

Width Between Columns 110-3/8″

Min. Pad Height 4″

Drive Thru Clearance 101″

Lifting Speed  50S

Asymmetric / Symmetric Symmetric

Clear Floor / Floor Plate Floor Plate

Short Arm Reach – min/max 31″-45″

Long Arm Reach – min/max Same

Narrow Bay Setting NA

Max Load Per Arm 2,250 lbs.

Ship Weight 1,270 lbs

Power 220V – 20 AMP – 1 PH

press to order (316) 613-2404 or email: stoney@centralequipment.net

part# VLE10 Challenger

Challenger Versymmetric 10K

$4,900

Lifting Capacity 10,000 lbs

Lift Configuration Symmetric and Asymmetric

Arm Configuration 3-Stage Versymmetric® Front/2-Stage Rear

Max Load Per Arm 2500 lbs

Rise Height (screw pads at highest position) 74.75"

Overall Height Standard: 143.875"

Extended Height: 167.875"

Overall Width 131.625"

Drive-Thru Clearance 98.375"

Floor to Overhead Switch Standard: 137"

Extended Height: 161"

Front Arm Reach 22.3125"-39.375"

Rear Arm Reach 38.375"-55.375"

Screw Pad Height 4.25"-6.75"

Between Columns 110.25"

Motor/Voltage 2HP, 208v-230v, 60Hz, 1Ph

Rise Time 44s

Ceiling Height Required Standard: 12' Extended Height 14'

press to order (316) 613-2404 or email: stoney@centralequipment.net

Part# SAE-C10XE Stratus

Stratus 10K 2-Post Extra Wide

$5,400

Extra wide drive through: 112”

Heavy duty 14-folds columns 

Clear floor

Symmetric & Asymmetric 2-in-1 design

Electric safety lock release

Direct drive

4 Screw-up rubber pads

4 x 4" (100 MM) truck adapters included

4 x 3-stage arms

2 top limiter switches

Anti-surge valves

Automatic arms restraints

Proofed by dynamic test with 115% of rated capacity and static test with 150% rated capacity

Powder coating finish: Granite Gray (RAL 7026) + Rein orange (RAL 2004)

press to order (316) 613-2404 or email: stoney@centralequipment.net

Part# I10 Forward

Forward Spot-Rite 10K 2-Post Lift ( Asymmetric & Symmetric)

$5,100

Capacity: 10,000LBS

Overall Height: 143 1/8"

Minimum Ceiling Height: 12'

Minimum Pad Height: 3 5/8"

Maximum Lift Height: 77"

Overall Floor Width: 131" or 137"

Inside Column Width: 109 3/4" or 115 3/4"

Drive Thru Width: 99" or 105"

Lift Pad Adapter Heights: 1 1/2", 3", 6"

Voltage: 2 H.P. 220V / Single Phase / 20 amp circuit

Front Arm Length: 23" - 44 1/2"

Rear Arm Length: 38 7/8" - 58"

Speed of Rise: 50 Seconds

Shipping Weight 1750-lbs.

Hydraulic Oil - AW32 or AW46

press to order (316) 613-2404 or email:stoney@centralequipment.net

Part# DP10A Forward

Forward 10K lb cap 2-Post Asymmetric

comes in standard or extended

$5,500 for extended $5,900 call (316) 613-2404 for extended

Capacity: 10,000lbs
Max. Rise w/5in extension: 76-1/4in (1937mm)
Overall Height: 143in (3632mm)
Overall Width: 131in or optional 137in (3327mm / 4380mm)
Drive through clearance: 99in or optional 105in (2515mm / 2667mm)
Overhead switch height: 137-5/8in (3496mm)
Front reach (Min/Max): 23in / 44-1/2in (584mm / 1130mm)
Rear reach (Min/Max): 36in / 58in (914mm / 1473mm)
Min/Max Adapter Height: 3-3/4in (95mm) no adapter extension
8-3/4in (222mm) w/5in adapter extension
Width Inside Column: 109in or optional 115in (2769mm / 2921mm)
Adapter Heights: 3-1/2inand 5in
Voltage/Amps: 208 / 230, 15 amps; 208/230, 16 amps
Motor: 1ph*/2HP/50Hz; 1ph*/2HP/60Hz
Ceiling height required:144in (3658mm)

press to order (316) 613-2404 or email: stoney@centralequipment.net

Part# TLS210NR1  TLS

Total Lift Solutions 10K 2-Post 3 piece arms (Blue or Red)

$6,000 while supplies last $4850

Capacity 10,000 lb. / 4.5T

Overall Height 138" or 148" / 3505mm or 3759mm

Under Bar Clearance (Field Asjustable) 131" or 141" / 3327mm or 3581mm

Overall Width 135-1/2" / 3429mm

Width Between Columns 112-3/4" / 2845mm

Drive Thru Width 92" / 2337mm - symmertric 100”/ 2540mm

Height to Lowered Lift Pad 4" / 102mm

Raised Height with Standard Pad 76" / 1930mm

Raise Height with Adapters 87" / 2210mm

Lifting Time 55 seconds

Front Arm Reach 19-3/4" to 42" / 502mm to 1067mm - Symmetric 35” to 60” / 889mm to 1524mm

Rear Arm Reach 35" to 60" / 889mm to 1524mm

Standard Power Requirements 230 Volts - 50/60 Hz - 1 PH - 20amp

Shipping Weight 1,980 lbs. / 900 kg.

Model: TLS210NRx1 Height as listed

Model: TLS210SRx1 Height as listed, Symmetric, Equal Arms

Model: TLS210NXx1 Extended Ht. 172” / 4370mm

Model: TLS210SXx1 Extended Ht. 172” / 4370mm Symmetric

press to order (316) 613-2404 or email:stoney@centralequipment.net

Part# TLS212S R1 TLS

Total Lift Solutions 12K 2-Post Symmetric

$8,000

Capacity 12,000 lbs. / 5.5T 12,000 lbs. / 5.5T 12,000 lbs. / 5.5T

Overall Height (Field Adjustable) 158 7/8” / 4035 mm or 154 7/8” / 3934 mm 158 7/8” / 4035 mm or 154 7/8” / 3934 mm 154 7/8” / 3934 mm

Under Bar Clearance 153 1/2” / 3899 mm or 149 1/2” / 3797 mm 153 1/2” / 3899 mm or 149 1/2” / 3797 mm 149 1/2” / 3797 mm

Overall Width (Field Adjustable) 137-1/8” / 3483mm 137-1/8” / 3483mm 145 1/8” / 3686 mm

Width Between Columns 109-3/4” / 2788mm 109-3/4” / 2788mm 117 3/4” / 2991 mm

Drive Thru Width 89-1/8” / 2264mm 97 5/8” / 2480mm 105 5/8” / 2683 mm

Height to Lowered Lift Pad 4" / 102mm 4" / 102mm 4" / 102mm

Raised Height with Standard Pad 76" / 1930 mm 76" / 1930 mm 76" / 1930 mm

Raise Height with Adapters 86 5/8” with 3” & 6” adapter / 2200 mm with 76 mm & 152 mm adapter 86 5/8” with 3” & 6” adapter / 2200 mm with 76 mm & 152 mm adapter 86 5/8” with 3” & 6” adapter / 2200 mm with 76 mm & 152 mm adapter

Front Arm Reach 21” to 39-3/4” / 533mm to 1010mm 35” to 59 5/8” / 889 mm to 1515 mm 35” to 59 5/8” / 889 mm to 1515 mm

Rear Arm Reach 35” to 59 5/8” / 889mm to 1515mm 35” to 59 5/8” / 889mm to 1515mm 35” to 59 5/8” / 889mm to 1515mm

Lifting Time 75 seconds 75 seconds 75 seconds

Standard Power Requirements 230 Volts - 60 Hz - 1PH - 20 Amp 230 Volts - 60 Hz - 1PH - 20 Amp 230 Volts - 60 Hz - 1PH - 20 Amp

Shipping Weight 2,300 lbs./ 1T 2,300 lbs./ 1T 2,300 lbs./ 1T

press to order (316) 613-2404 or email:stoney@centralequipment.net

Part# I12N301 Forward

Forward 12K 2-Post Symmetric

$10,300

Hydraulic cylinders in each column

Full Stroke

75-3/4″ Rise | 80-3/4″ (With 5″ adapter extensions)

3 Stage arm design

Door Bumper Kits Standard

Overhead cable equalization

Single Point lock release

Large rubber-padded drop-in adapter with extra height extensions (1.75″, 3.5″ and 5″) are standard

Spring operated arm restraints, disengage at floor level

Padded overhead height limit switch bar

Durable powder coat finish

press to order (316) 613-2404 or email:stoney@centralequipment.net

Part# DP15N101 Forward

Forward 15K 2-Post Lift 14'7" 2-Stage Arms

$14,000 or with a 3 stage arm $19,000

SPECS:

Arm Type: 2 Stage
Total Capacity: 15,000 lbs. (8164kg)
Rise*: 83-1/4in (2114mm)
Overall Floor Width: 154-3/8in (3921mm)
Inside Column Width: 119-5/8in (3038mm)
Drive Through: 108-1/4in (2749mm)
Arm Reach: 38in (965mm) 61in (1549mm)
Minimum Adapter Height: 5-1/2in (139mm)
Stackable Adapter Height (Low Extension): 10-1/2in (266mm)
Stackable Adapter Height (High Extension): 15-1/2in (393mm)
Voltage*: 208/230v, 20 amps
Amps: 20
Motor: 2 HP/1Ø
Color: Red/Blue

press to order (316) 613-2404 or email:stoney@centralequipment.net

Part# TLS216SRX1 TLS

Total Lift Solutions 16K 2-Post Symmetric 

$20,000

Capacity 16,000 lbs/ 7.3T

Overall Width 152” / 3861mm

Width Between Columns 120 1/2”/ 3061mm

Drive Thru Width 108”/ 2743mm

Overall Height 199 1/2”/ 5067mm

Under Bar Clearance 192 1/2”/ 4890mm

Lowered Height - Standard Lift Pad 4” / 102mm

Raised Height - Standard Lift Pad 76”/ 1930mm

Raise Height with Adapters 85”/ 2159mm

Lifting Time 70 seconds

Front Arm Reach 34” to 62”/ 864mm to 1575mm

Rear Arm Reach 34” to 62”/ 864mm to 1575mm

Standard Power Requirements 220V-60Hz-1ph-25A

Shipping Weight 3,350 lbs/ 1520kg

press to order (316) 613-2404 or email:stoney@centralequipment.net

Part# CR14 Forward

Forward 14K 4-Post Closed Front 182.5" Max Wheel Base

$9,300

Capacity: 14,000 lbs. (6350kg)

Rise: 78.75″ (2000mm)

Maximum Wheelbase: 78.75″

Overall Length: 250″

Overall Width: 131.75″ (3568mm)

Width Inside Column: 116.25″ (2953mm)

Length Between Columns: 195.25″ (4946mm)

Overall Height: 90.5″ (2299mm)

Runway Width: 20″ (508mm)

Runway Height: 7″ (178mm)

Width Between Runways: 43″ (1092mm) or 46″ (1168mm)

Rise Time: 72 seconds

Voltage: 208/230v

Motor: 2HP

Minimum Bay Size: 15′ x 25′ (4572 x 7620mm)

press to order (316) 613-2404 or email:stoney@centralequipment.net

Part# CRO14 Forward

Forward 14K 4-Post open Front 182.5" Max Wheelbase
$13,000

Capacity 14,000 lbs. (6350kg)

Maximum Wheelbase 182-1/2" (4635mm)

215" (5461mm)

Rise 78-3/4" (2000mm)

Overall length 253" (6426mm)

286" (7264mm)

Overall width 140-1/2" (3567mm)

Width Inside Columns 116-1/4" (2953mm)

Length between Columns 194-3/4" (4946mm)

227-3/4" (5784mm)

Overall height 109-1/16" (2770mm)

Runway width 20" (508mm)

Runway Height 7" (178mm)

Width Between Runways 43" (1092mm)

 Rise Time 79 seconds

Motor 2HP

Minimum Bay Size 15' x 26' (4572mm x 7925mm)

15' x 28' (4572mm x 8534mm)

press to order (316) 613-2404 or email:stoney@centralequipment.net

Part# CRO14EL2

Forward 14K 4-Post open Front 215" Max Wheelbase

$13,500

Specifications CRO14N101Y Differences CRO14N102Y

Capacity 14,000 lbs. (6350kg) 14,000 lbs. (6350kg)

Rise 78-3/4" (2000mm) 78-3/4" (2000mm)

Maximum Wheelbase 182-1/2" (4635mm) <32-1/2"> 215" (5461mm)

Overall Length 253" (6426mm) <33"> 286" (7264mm)

Overall Width 140-1/2" (3568mm) 140-1/2" (3568mm)

Width Inside Columns 116-1/4" (2953mm) 116-1/4" (2953mm)

Length Between Columns 194 3/4" (4946mm) <33"> 227 3/4" (4946mm)

Overall Height 109-1/16" (2768mm) 109-1/16" (2768mm)

Runway Width 20" (508mm) 20" (508mm)

Runway Height 7" (178mm) 7" (178mm)

Width Between Runways 43" (1092mm) 43" (1092mm)

Rise Time 79 seconds 79 seconds

Voltage* 208/230v 208/230v

Motor 2HP 2HP

Minimum Bay Size 15' x 26" (4572 x 7925mm) <24"> 15' x 28" (4572 x 8534mm)

press to order (316) 613-2404 or email:stoney@centralequipment.net

Part# 4015XFO Challenger

Challenger 15K 4-Post Open Front

$11,800

Model Number 4015XFO

Lifting Capacity 15,000 lbs.

Open or Closed Front Open

Max. Wheelbase 210"

Rise Height 78"

Overall Length 277.25"

Overall Width 142" / 133.25"

Inside Columns 120"

Between Columns 222.5"

Height of Columns 99.5" / 93.5"

Width of Runways 20"

Height of Runways 7"

Width Between Runways 43"

Air Supply Required 90-120 psi

Motor / Voltage 2HP, 208v-230v, 60Hz, 1Ph

Speed or Rise 85 s

Min. Recomm. Bay Size 12' x 26'

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# AR4015EAX Challenger

Challenger 15K Closed Front Alignment Lift

$18,000

Lifting Capacity 15,000 lbs.

Open or Closed Front Closed

Max. Wheelbase 182.5″

Rise Height 78″

Overall Length 245.75″

Overall Width 134.5″

Inside Columns 120″

Between Columns 196″

Height of Columns 93.5″

Width of Runways 20″

Height of Runways 7″

Width Between Runways 40″ / 43″

Max. 2 Wheel Alignment 166.5″

4 Wheel Alignment 88″ – 158″

Air Supply Required 90-120 psi

Motor / Voltage 2HP, 208v-230v, 60Hz, 1Ph

Speed or Rise 85 s

Min. Recomm. Bay Size 12′ x 24′

ALI/ETL Certified Yes

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# PP8 S Direct lift

(PP8PL2PY11) 8K CAP EXTENDED STORAGE LIFT

$5,200

Capacity 8,000 lbs

Maximum Rise 72 1/2"

Clearance Under Runways 68”

Overall Length w/ Approach Ramps 17’ 3 1/2"

Overall Length w/o Approach Ramps 14’ 7 1/2"

Overall Width with Motor 9’ 7”

Overall Width without Motor 8’ 7 1/2"

Approach Ramp Length 37”

Runway Width 20”

Runway Length 169 1/2”

Runway Height 4 1/2"

Drive Through Width 80 1/2"

Column Height 6’ 9 1/2"

Clearance Between Columns 94”

Clearance Between Runways 38”

Outside Runway to Outside Runway 78”

Motor 115 Volt, 1HP

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# PP8 PLUS LONG DIRECT LIFT

(PP8PL2PY11) 8K CAP EXTENDED HT STORAGE LIFT

$5,800

Capacity 8,000 lbs

Maximum Rise 86”

Clearance Under Runways 81 1/2"

Overall Length w/ Approach Ramps 18’ 10”

Overall Length w/o Approach Ramps 16’ 2”

Overall Width with Motor 10’ 1”

Overall Width without Motor 9’ 1 1/2"

Approach Ramp Length 37”

Runway Width 20”

Runway Length 184”

Runway Height 4 1/2"

Drive Through Width 86 1/2"

Column Height 7’ 11 3/4"

Clearance Between Columns 100”

Clearance Between Runways 38”

Outside Runway to Outside Runway 78”

Motor 115 Volt, 1HP

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# H4D-5555 DIRECT LIFT

Drip Trays for PP8 & pp8S (Set of 4)

$210

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# RJ35BK  DIRECT LIFT

Rolling jack for PP8

$1,200

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# 4P8PLDWAL TLS

Quatro stacker 8K wide

$5,600

Capacity 8,000 lbs.

Lifting Height 72.5"

Overall Length w/Approach Ramps 207-1/2"

Overall Width (with motor) 115"

Overall Width (without motor) 103-1/2""

Overall Length without Approach Ramps 175.5"

Approach Ramps 32"

Runway Width 18-1/2"

Runway Length 169.5"

Runway Thickness 4-1/2"

Clearance Between Columns 94"

Drive through width 80-1/2"

Height of Columns 81.5"

Clearance Between Runways 38"

Outside Runway to Outside Runway 75"

Clearance Under Runways 68"

Power Unit 110 Volt, 1HP

Shipping Weight 1,820 lbs.

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part#  4P8LDXAL TLS

Quatro stacker 8K regular

while supplies last $4,800

Feature 8K REGULAR

Capacity 8,000 lbs / 3.6T

Overall Length with Ramps 207” (5259mm)

Runway Length 165-1/4” (4197mm)

Front to Rear Outside Columns 169-1/2” (4305mm)

F/R Inside Columns 157-1/4” (3994mm)

F/R Outside Column Baseplates 175-1/2” (4458mm)

Approach Ramp Length 36-1/2” (927mm)

Width Between Runways 37-1/2” (953mm)

Runway Width 18-3/4” (476mm)

Width Outside Runways 74-3/4” (1899mm)

Overall Width (no Power Unit) 103-1/2” (2629mm)

Column Height 86-1/4” (2191mm)

Runway Height 4-1/4” (108mm)

Lifting Height 4 3/4” (120mm) ~ 77 1/4” (1962mm)

Max. Clearance (Under Runway) 72-1/4” (1835mm)

Drive Thru Clearance (vehicle parked under runway) 94-1/2” (2400mm)

Drive Thru Clearance (vehicle parked on runways ) 90-1/4” (2295mm)

Accessories Included Caster wheels, 3 steel drip/drain trays and 1 steel jacking tray, 4 removable wheel stops, steel approach ramps

ALI Approved Mechanical Locking System Standard on all Models

Power Requirement 110V / 60Hz / 1Ph. – 15 amp. Or 230V / 60Hz / 1Ph – 11 amp

Shipping Weight 1600 lb. / 725.7 kg

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# 4P8PLDTAL TLS

Quatro Stacker 8K Ext. Height

while supplies last $ 5,600

Feature 8K WIDE VERSION

Capacity 8,000 lbs / 3.6T

Overall Length with Ramps 207” (5259mm)

Runway Length 165-1/4” (4197mm)

Front to Rear Outside Columns 169-1/2” (4305mm)

F/R Inside Columns 157-1/4” (3994mm)

F/R Outside Column Baseplates 175-1/2” (4458mm)

Approach Ramp Length 36-1/2” (927mm)

Width Between Runways 43-1/2” (1105mm)

Runway Width 18-3/4” (476mm)

Width Outside Runways 80-3/4” (2051mm)

Overall Width (no Power Unit) 109-1/2” (2781mm)

Column Height 86-1/4” (2191mm)

Runway Height 4-1/4” (108mm)

Lifting Height 4 3/4” (120mm) ~ 77 1/4” (1962mm)

Max. Clearance (Under Runway) 72-1/4” (1835mm)

Drive Thru Clearance (vehicle parked under runway) 100-1/4” (2550mm)

Drive Thru Clearance (vehicle parked on runways ) 96-1/4” (2445mm)

Accessories Included Caster wheels, 3 steel drip/drain trays and 1 steel jacking tray, 4 removable wheel stops, steel approach ramps

ALI Approved Mechanical Locking System Standard on all Models

Power Requirement 110V / 60Hz / 1Ph. – 15 amp. Or 230V / 60Hz / 1Ph – 11 amp

Shipping Weight 1750 lb. / 793.8 kg

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# 4PL9PLXAL TLS

Quatro stacker 9K

While supplies last $6,300

Capacity 9,000 lbs.

Overall Length w/Ramp 239"

Overall Length No Ramp 197"

Overall Width 123"

Overall Width w/Power Unit 134.5"

Column Height 97"

Lifting Height 85"

Approach Ramp Length 37"

Runway Tread Width 20"

Runway Length 188.5"

Runway Height 4.80"

Clearance between Columns 111.5”

Clearance between Runways 39.5"

Outside Runway to Outside Runway 79”

Clearance Under Runways 81"

Drive Thru Width 99"

Locking Position 11

Lifting Speed 100 sec

Power 110V-20 Amp / 1PH

Ship Weight 2,354 lbs.

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# M-1000C Tuxedo

1000 lb Cap Motorcycle lift

$1,400

Lift Model M-1000C

Capacity 1,000 lbs

Min. Height 7”

Max Lifting Height 30”

Overall Length w/ Ramp 108”

Overall Width 47″

Platform Size (L x W) 84″ x 24″

Power Air (90-100 PSI)

Ship Weight 395 lbs

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# M-FrontExt Tuxedo

Front Extension

$165

 Weight 30 lbs

Dimensions 25 × 25 × 5 in

Brand

Tuxedo

Capacity

1,000 lbs

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# M-Jack Tuxedo

Cycle Jack

$175

CYCLE JACK

1,100 Lbs capacity.

Min. Height 3 3/4"

Max. Height 15 3/4"

Includes two adjustable frame cradles.

Includes platform 17 23/32" X 5 29/32"

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# M-SideExt Tuxedo

Side Extensions

$375

Expands width of lift from 24" to 48" (2 Ea.)

Includes ramp extensions

For Model M-1000C

Perfect addition for an atv lift or lawnmower lift

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# M-Vise Tuxedo

Vise

$160

Ship Weight

25.0 LB

Accessories Type

Vise

Product Weight

25 lb

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# MR6 Challenger

Challenger 6K Mid-Rise Lift

$3,460

Lifting Capacity: 6,000 lbs.

Rise Height: 52.75"

Overall Length: 94"

Overall Width: 40"

Min. Collapsed Table Height: 5.5"

Pad Height (Min.): 8.625"

Pad Height (Max.): 60"

Hydraulic Hose: 144"

Safety Lock Positions: 6

Motor / Voltage: 1HP, 115V, 60Hz, 1Ph

Speed of Rise: 45 seconds

Min. Recomm. Bay Size: 10'' x 22'

Colors Available: Black

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# SRM10 Challenger

Challenger 10K Short Rise Pad Lift

$5,370

 Model Number SRM10

 Lifting Capacity 10,000 lbs.

 Raised Height 22”

 Lowered Height 4.25”

 Locking Bar Heights 13.75”, 18.325”, 21.25”

 Low Adapter Position 4.75”

 High Adapter Position 6.75”

 Overall Width 85” (+ 2.5” for handle)

 Outside Width of Platforms 72”

 Width between Platforms 23”

 Platform Overall Length 50”

 Ramp & Platform Overall Length 82.5”

 Overall Length 92.875”

 Rearward Movement 13.25”

 Motor / Voltage 1HP, 115v, 60Hz, 1Ph

 ALI/ETL Certified Yes

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# TD2.0WIFI  RAV

RAV Aligner WIFI 96 System

$18,000

Dust- and water-resistant (IP52)

Fall-resistant up to 76 cm

64 GB of memory

Display 800 x 1280

Complete with adhesive magnets

Rounded edges to ensure greater sturdiness

2 MP front camera + 5 MP rear camera

Weighs less than 700 g

10″ multi-touch 800 x 1280 tablet complete with adhesive magnets

8 CCD sensors with bearings, encoder rapid charging sockets

2 wall-mounted panels with recharging for the measuring heads, and USB charging port for the tablet

2 pairs of 3-point clamps

Pair of S110A7/P turn tables (included)

1 STDA161 steering wheel lock (included)

1 brake pedal arrestor (included)

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# 609 Geoliner Hoffmann

Hofmann 609 Geoliner

$16,000

Wheel Size (AC200) 12-24" (305-610mm)

Track width 48-96" (1,219-2,438mm)

Wheel base 79-180" (2,006-4,572mm)

Power supply 115 VAC 1Ph 50/60 Hz

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# 770 Hofmann Hofmann

Hofmann 3D Alignment System

$27,500

Tire Diameter 19″ - 39″ (48.3 cm - 99.1 cm)

Track Width 48″ - 96″ (121.9 cm - 243.8 cm)

Wheel Base 79″ - 180″ (200.7 cm - 457.2 cm)

Power Supply 115 V, 50/60 Hz, 1 Ph

Power Requirements 100/230 VAC (must have Earth ground), 50/60 Hz, 15 Amp Circuit

TECHNICAL DATA AC400 Wheel Clamps

Tire Diameter 19″ - 39″ (48.3 cm - 99.1 cm)

Weight 7 lbs (3.2 kg)

Clamping Force 37 lbf (164.6 N)

Construction Cast Magnesium

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# BH-7006-01-20 SVI

1 PH 2 HP Power Unit

$820

2900 PSI, 4.0 Gallon

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# TC-530 Tuxedo

Tire changer

$2,450

Tire Changer Model: TC-530

Max Wheel Diameter: 38”

Wheel Width: 3” – 12”

Inside – Rim Clamp Range: 12” – 23”

Outside – Rim Clamp Range: 10” – 20”

Power: 110V – 15 Amp – 1PH

Working Pressure: 125 psi

Ship Weight: 560 lbs

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# TC-950 Tuxedo

Tire Changer

$2,700

Max Wheel Diameter 47”

Wheel Width 3” – 15”

Inside – Rim Clamp Range 15” – 28”

Outside – Rim Clamp Range 13” – 24”

Power 110V – 15 Amp – 1PH

Working Pressure 125 psi

Ship Weight 640 lbs

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# TC-MC-AN Tuxedo

Tire Changer Motorcycle Adapters ( Sets of 4 )

$315

Part Type: Tire Changer Machine Components

Product Line: Tuxedo Motorcycle Wheel Clamp Adapter Kits

UPC: 850049061766

Tire Changer Machine Component Type: Clamp adapter

Quantity: Sold as a set of 4.

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# 0-11106905/00 Corghi

Service Pro 120 (grey)

$2,800

Power Supply: 115V - 60Hz - 1 Ph

Self-Centering: 12in. x 22in. (inside)

Chuck Opening: 10in. x 20in. (outside)

Bead Breaking Power: (blade) 2700lb.

Bead Breaker Opening: 15.4in. (390mm)

Max. Wheel Diameter: 38.6in. (980mm)

Max. Wheel Width: 11in.

Working Pressure: 150 psi

Max. Chuck Rotation Torque 1070 ft/lbs

Chuck Rotation Speed: 5,5 r.p.m.

Motor Power: 0,8 kW

Weight: 485lbs. (220 Kg)

Noise Level When Running: <70 dB (A)

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# A9824TI Corghi

Corghi Tire Machine (24")- Electric

$6,900

Max. Tire Diameter 47"

Max Rim Width 14"

Rim Diameter - Internal 13” to 26”

Rim Diameter - External 10” - 24”

Rim Diameter w/Adapters - External 8” to 28”

Table Top Rotation Torque 737 ft-lb

Table Top Rotation Speed 11 rpm

Power Requirements 110 V / 1PH / 50 Hz

Dimensions - Max 78" H x 48" W x 42" D

Weight 503 lbs.

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# A9824TIPSI Corghi

Corghi Tire Machine (24")- Air 

$7,200

Max. Tire Diameter 47"

Max Rim Width 14"

Rim Diameter - Internal 13” to 26”

Rim Diameter - External 10” - 24”

Rim Diameter w/Adapters - External 8” to 28”

Table Top Rotation Torque 737 ft-lb

Table Top Rotation Speed 11 rpm

Air Requirements 130 psi

Dimensions - Max 78" H x 48" W x 42" D

Weight 503 lbs.

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# A9824TI-1500 Corghi

Corghi Tire Machine (24") w/PU1500

$9,400

Max. Tire Diameter 47"

Max Rim Width 14"

Rim Diameter - Internal 13” to 26”

Rim Diameter - External 10” - 24”

Rim Diameter w/Adapters - External 8” to 28”

Table Top Rotation Torque 737 ft-lb

Table Top Rotation Speed 11 rpm

Power Requirements 110 V / 1PH / 50 Hz

Air Requirements 130 psi

Dimensions - Max 78" H x 48" W x 42" D

Weight 503 lbs.

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# A9824 Corghi

Corghi Tire Machine (26")

$7,300

Turntable:

Inside clamping capacity: 13" - 26"

Outside clamping capacity: 10" - 26"

Max tire diameter: 43"

Max tire width: 14"

DV version rotation torque: 959 ft-lbs (1300 Nm)

DV version rotation speed: 6 - 15 rpm

Height above the ground: 27"

Bead Breaker:

Type: Adjustable arm with extending shoe

Max opening: 380mm

Shoe force: 15500 N

Support: telescopic

Power Supply:

Electrical 1 Ph - 110/230 V - 0.75 kW

Working Range: 8"/26"

Column: Pneumatic Tilting

Head clamping: Pneumatic

Operating Pressure: 10 bar

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# 8-11120055 Corghi

BPT For Corghi A9830

$1,450

Kit is designed to bolt directly onto your Corghi machine

Hardware and instructions are included in every kit

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# MASTER J Corghi

Corghi Master J Tire Machine

$21,000

Max. Tire Diameter 40" (1,016 mm)

Max Wheel Width 15" (385 mm)

Wheel Diameter 12-26” (305-660 mm)

Turnable Torque 811 ft-lb

Turnable Speed 7 rpm/18 rpm

Max Bead Breaking Range 18" (457 mm)

Bead Breaker Stroke 17.7" (450 mm)

Bead Breaker Force 1,710 lbs. (776 Kg)

Operation Pneumatic

Power Requirements 110 V / 1PH / 50 Hz

Air Requirements 130 psi

Dimensions - Max 71.42" H x 44.65" W x 74.96" D

Weight 881 lbs. (400 Kg)

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# G7246ID.26A RAV

RAV 26'' 220V Speed Changer Tire Machine

$6,300

 26″ Outside Clamping

220 Volt Variable Speed Drive

8000 lbs. Bead Breaker

Hand Controlled Bead Breaker

Air Tank Located in Column

Removable Pedal Assembly for Maintenance

Valve Tray

press to order  (316) 613-2404 or email:stoney@centralequipment.net

part# PLUS91SA RAV

Helper Arm For RAV G7246

$2,000

Rotary’s PLUS91SA Helper Arm Upgrade Option R146 option for the R146. Bead top pressing and tire lifting device for large and special tires.

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# G8945DS.ITA RAV

RAV Leverless Memory Series

$14,000

Wheel lift, Inflation by pedal, and Helper Arm PLUS91AKC are standard.

Patented durable lever tool made from tough but flexible plastic anti-scratch material

Quick lock-nut secures rim to the tire changer mounting hub, (similar to a wheel balancer flansh)

Two height position of mounting hub, for standard or reverse rims

Space Saver – Tire changer post with vertical “space saver” movement

Leverless tool retains it’s “Memory” position to the rim edge. Set it the first time and it will go back to same position by just pushing a foot pedal

Familiar bead breaker shovel opens quickly to speed up bead breaking via bead breaker shovel. (Can be used as alternative to breaking the bead with the bead breaker roller.)

Roller radial position setting

Easy demounting of the lower bead with the bead breaker roller

Easy and controlled bead breaking – Roller rotation 180°

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# WB-593 Tuxedo

Wheel Balancer w/Hood

$2,100

-Cycle time 10 sec.

-Method of data entry keypad

-Tire diameter 39”

-Tire width 1 1⁄2 ”- 20”

-Rim diameter 10”- 24”

-Wheel weight 150 lbs.

-Accuracy 1 gram

-Power requirements 110 vac

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# WB-1030-LTCS Tuxedo

Truck Cone Set

$300

Product Model WB-953-TASK

Spacer ID 7 1/4"

Spacer OD 8 5/8"

Spacer Center Hole 36MM

Spacer Offset 1 3/4"

Cone Range Small Slide 4 7/8" to 6 1/8"

Cone Range Large Slide 6" to 6 7/8"

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# 81035A Norco

Norco 1-1/2 Ton Cap. Under Hoist Stand

$195

Low Height | 48.875"

Extended Height | 85.375"

Base Size | 12" x 12" x 12"

Saddle Size | 3.25" x 3.25"

Shipping Weight | 48 lbs.

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# 712335A Norco

Norco 2 Ton Floor Jack DBL PUMP

$385

Low Lift Height 4"

High Lift Height 21.375"

Length 28.5"

Width 14.375"

Handle Length 50.25"

Shipping Weight 106 lbs.

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# 71335 Norco

Norco 3.5 HD Floor Jack

$469

Low Lift Height 4"

High Lift Height 21.375"

Length 28.5"

Width 14.375"

Shipping Weight 106 lbs.

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# 71500E Norco

Norco 5 Ton Floor Jack]

$1,544

Low Lift Height 5.625"

High Lift Height 27.25"

Length 62.25"

Width 16.75"

Shipping Weight 270 lbs.

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# 72000D Norco

Norco 1-1/2 Ton Transmission Jack

$2,800

Low Lift Height 7.75"

High Lift Height 36.5"

Length 45"

Width 28"

Saddle Size 10.25" x 15.25"

Shipping Weight 310 lbs.

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# 72500E Norco

Norco 1/2 Ton Telescopic Transmission Jack

$1,335

Low Lift Height: 35"

High Lift Height: 72"

Base Dimensions: 34" x 37"

Shipping Weight: 176 lbs.

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# 72550B Norco

Norco 1/2 Ton Fast Pump Transmission Jack

$1,415

Low Lift Height: 35"

High Lift Height: 72"

Base Dimensions: 34" x 37"

Shipping Weight: 178 lbs.

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# LA 5721 NCA

Pump 3 gal. 3 cfm @ 125 psi oiless compressor

$279

Brand

Puma

Manufacture's Warranty

12 months parts / 12 months labor

Ship Weight

41.0 LB

Horsepower

1 HP

Air Tank Size

2 Gal

Volts

115

CFM at 90 PSI

2.2

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# DP2022S NCA

Puma 4 gal. 5 cfm @ 125 psi compressor

$435

Weight

75 Pounds

Certification

CSA

Consumer Warranty

1 Year

Product Length

19.2 Inches

Product Width

19.6 Inches

Product Height

18.8 Inches

Power Type

Electric

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# PD1006 NCA

Puma 1.5 gal. 3 cfm@125 psi portable air compressor

$328

Brand ‎PUMA

Voltage ‎12 Volts (DC)

Recommended Uses For Product ‎Drilling, Air Brushing, Spraying, Nailing

Power Source ‎Electric

Noise Level ‎30 dB

Included Components ‎Filters

Item Weight ‎31 Pounds

Maximum Power ‎1 Horsepower

Capacity ‎1.5 Gallons

Style ‎Portable

Air Flow Capacity ‎3.5 Cubic Feet Per Minute

Motor Horsepower ‎0.75 Horsepower

Model Name ‎PD1006F

Manufacturer ‎Puma Industries

Part Number ‎PD1006F

Item Weight ‎31 pounds

Product Dimensions ‎19.3 x 8.3 x 17.3 inches

Item model number ‎PD1006

Is Discontinued By Manufacturer ‎No

Item Package Quantity ‎1

Batteries Included? ‎No

Batteries Required? ‎No

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# PUK13010HGE NCA

Puma 10 Gal. 13hp Air Compressor Twin Tank

$3,265

Length 46 in 41 in 21 in 48-1/2 in

Width 20 in 16 in 24 in 44 in

Height 28-1/2 in 25 in 20 in 34 in

Weight 318 lbs 143 lbs 74 lbs 219 lbs

Tank Size 8 gal 8 gal (2) 4 gal 10 gal

Tank Outlet 1/4" 3/8 1/4" 1/4"

Oil Type Oil Lubricated Oil Lubricated Oil Free Oil Lubricated

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# TUK130030HGE NCA

Puma 30 Gal. 13hp Air Compressor

$ 3,400

Weight 460 lbs

Dimensions 40 × 22 × 42 in

Brand

PumaAir

CFM @ 175 psi

23

Capacity

30 Gallons

H.P.

13 HP

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# PK6060V NCA

Puma 60 Gal. 5 hp Air Compressor

$1,130

Weight 325 lbs

Dimensions 48 × 48 × 60 in

Brand

Puma Air

Model

PK-6560V

C.F.M. @ 40 P.S.I.

17

C.F.M. @ 90 P.S.I.

15.5

Pump Style

Splash Oil Lubricated

Capacity

60 Gallons

Voltage

208-230V

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# CI521E80V NCA

American Industrial 80 Gallon 5 hp

$2,835

Ship Weight

300.0 LB

Air Tank Size

80 Gal

Volts

208-230

CFM at 90 PSI

19.2

Motor Phase

1

Stage

2

Tank Orientation

Vertical

Horsepower

5 HP

Max. PSI

190

Air Outlets (qty.)

1

Working Pressure

175 PSI

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# NCST50 PUMA NCA

PUMA 5hp Quiet One

$3,300

 5 Horse Power

 Single Phase

 230 Volt

 21 CFM At 175 PSI

 RPM: 830/700

 Working PSI: 115

 Max PSI: 200

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# 931.8272 Schulz

60 Gallon 5 hp

$1,470

Air Displacement (CFM)

18

Air Displacement (l/min)

509

Motor Power (hp)

5

Motor Power (kW)

3.75

Maximum Operating Pressure (PSI)

145

Minimum Operating Pressure (psi)

116

Voltage (V)

230

Compressor Unit - No. Stages

Single Stage

Compressor Unit - No. Pistons

2-L

Tank Size (gal)

60

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# 932.9361-0 Schulz

80 Gallon 5hp 175 psi Air Compressor

$3,100

Tank mount

80 or 120gal tank

Vertical or horizontal tank orientation

5 to 20 HP

20 to 80 CFM displacement

175 PSI pressure rating

230/1/60 or 208-230/460/3/60 voltage options

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# 932.9361-OP Schulz

80 Gallon 5hp 175psi Air Compressor- PREMIUM SERIES

$4,600

Product Category

Air Compressor - Stationary

Weight

508 Pounds

Certification

ASME

Consumer Warranty

1 Year

Product Length

34 Inches

Product Width

32 Inches

Product Height

74 Inches

Power Type

Electric

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# SD523120HL20-BP Schulz

120 Gallon 5hp Duplex - Basic

$6,750

Weight 844 Pounds

Certification ASME

Product Length 78 Inches

Product Width 26 Inches

Product Height 58 Inches

Power Type Electric

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# SD523120HL20-PP Schulz

120 Gallon 5hp Duplex - Premium

$7,950

Weight 504 Pounds

Certification ASME, UL

Product Length 32.3 Inches

Product Width 19.7 Inches

Product Height 72.8 Inches

Power Type Electric

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# SMH40 Schulz

Air Dryer

$1,800

Product Category

Air Compressor Accessories

Weight

75 Pounds

Product Length

16.8 Inches

Product Width

26.6 Inches

Product Height

16.4 Inches

Power Type

Electric

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# ADS50-UP Schulz

Air Dryer

$1,400

Product Category

Air Compressor Accessories

Weight

70 Pounds

Consumer Warranty

1 Year

Commercial Warranty

1 Year

Product Length

19 Inches

Product Width

15 Inches

Product Height

19 Inches

Power Type

Electric

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# ADS100 Schulz

Air Dryer

$1,900

Product Category

Air Compressor Accessories

Weight

86 Pounds

Product Length

17 Inches

Product Width

14 Inches

Product Height

30 Inches

Power Type

Electric

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# HPL23B Graco

Graco Air Reel ( Blue ) 3/8'' X 35'

$630

SD 10,

Air/Water/Antifreeze/Windshield Washer Sol,

 1/2" Inlet, 3/8" x 35' Hose,

 NPT,

Overhead Mount,

 Metallic Blue

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# HPL25B Graco

Graco 3/8'' X 50' Low Pressure Reel

 $640

Compatibility: Anti-Freezes, Pneumatic Air, Water, Windshield Washer Fluid

Construction: Adjustable, Durable, Flexible, Overhead Mount, Rigid, Single Pedestal, With Hose

Dimension: 3/8" x 50'

Finish: Baked Enamel, Metallic

Industry Application: Dealerships, Garages, Maintenance, Public Works, Transportation

Length: 50'

Material: Steel - Carbon Alloy

Placement: Commercial Vehicles, Exterior, Interior

Pressure: 300 PSI

Product Type: Corrosion Resistant

Service Type: Fleet

Size: 10

Style: Compact, Male, NPT, Swivel

press to order  (316) 613-2404 or email:stoney@centralequipment.net

 Part# HPL25C Graco

Graco 50' Hose Reel ( RED)

$640

Color Red

Pressure [Max] 300 psi

Inlet Size 1/2 in

Hose Length 50 ft

Compatible Fluids Air, Water, Antifreeze, WWS

Temperature Rating [Max] 190 °F

Reel Drive Spring-Rewind

Weight 48.5 LB

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# SDM65B Graco

Graco 1/2'' X 50' Hose Reel

$745

Application Oil

Color Metallic Blue

Frame Type Single Pedestal

Hose Inside Diameter (in) 1/2

Hose Length (ft) 50

Hose Reel Type Reel with Hose

Inlet Size (in) 1/2

Inlet Thread Gender Male

Inlet Thread Type NPSM

Maximum Temperature (°F) 190

Maximum Working Pressure (psi) 2000

Minimum Temperature (°F) -20

Mount Location Overhead Mount

Outlet Size (in) 1/2

Outlet Thread Gender Male

Overall Height (in) 21.8

Overall Length (in) 19.2

Overall Width (in) 7

Recommended Environment Indoor, Limited Outdoor

Recommended Fluid Type Oil

Reel Thread Type NPT

Series 20

Type Spring-Rewind Reel

Wetted Parts Zinc-Plated Steel, Anodized Aluminum, Nitrile Rubber

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# 34788NI Robinair

Robinair A/C Recycler R134A

$5,695

Operating Range: 32° - 120°F (0°-50°C)

Recovery Performance: >95% at 70 to 75° F (21 to 24°C) <30 minutes

Voltage: 125 VAC 60 Hz

Charge Performance: +/- 0.5 oz at 70° to 75° F (+/- 15g at 21° to 24° C)

Display: 5 cm x 9 cm graphical display

Filter-Drier Capacity: 150 lb (75kg), spin-on type

Hoses: 9 ft (2.75 m)

Compressor: 3/8 hp, pressure protected, oiled, hermetically sealed

Dimensions (HxWxD): 48.5 in x 24 x 36 (123 cm x 61 cm x 91 cm)

Vacuum Pump: 1.5 cfm Dual Stage, 29.9 InHg

Languages: English, French, Spanish, Portuguese

Internal Cylinder: 30 lb. DOT

Certifications: SAE J2788

Weight: Approximately 230 lbs. (103 kg)

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# ROB34288NI Robinair

Robinair A/C Recycler R134A

$4,400

Dimensions

107 cm x 61 cm x 76 cm

Display

5 × 9 cm (4.3-in. diag) graphical LCD

Filter Capacity

68 kg (150 lb)

Humidity

32.2°C (90°F), 80% RH non-condensing

Gauges

Ø 80 mm (3.15 in.)

Maximum Pressure

27.3 bar (396 PSI)

Noise

<70 dB(A)

Operating Voltage

115V, 60 Hz

Oil Drain Bottle Capacity

355 ml (12 oz)

Operating Temperature

10°C to 50°C (50°F to 122°F)

Vacuum Pump

1.5 CFM (42 L/m) @ 60 Hz

Service Hoses

2.75 m (9 ft) / SAE J2196

Internal cylinder

30 lb DOT (13.6 kg); 22 lb (10 kg) capacity

Weight

73 kg (161 lb)

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# ROBAC1234-4 Robinair

Robinair R-1234YF A/C Recycler

$7,615

107 cm x 56 cm x 80 cm

Display

5 × 9 cm (4.3-in. diag) graphical LCD

Filter Life

150 kg (330 lb)

Humidity

10-50°C (50-122°F), 86% RH non-condensing

Gauges

Ø 100 mm (3.9 in.)

Maximum pressure

31 bar (450 PSI)

Noise

<70 dB(A)

Voltage

115 VAC, 60 Hz

Oil Bottle Capacity

355 ml (12 oz)

Operating Temperature

10°C to 50°C (50°F to 122°F)

Power Consumption

1380 VA

Vacuum Pump

1.5 CFM (42 L/m) @ 60 Hz

Service Hoses

2.75 m (9 ft) / SAE J2886

Internal cylinder

30 lb DOT (13.6 kg); 21 lb (9.5 kg) capacity

Weight

82 kg (176 lb)

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# GAIGBB6L Toolweb

Bead Bazooka 6 Filter

$450

Dimensions: 23″ x 7″ x 12″

Weight: 16 lbs

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# 24176 Liquid Dyn

21 Gallon Pressurized Oil Drain

 $519

Tank Capacity : 21 Gallons

Collection Bowl Capacity : 5 Gallons

Min. Working Height : 50.4″

Max. Working Height : 76.4″

Discharge Hose Length : 6.5′

Relief Valve pop-off Pressure : 14 PSI

press to order  (316) 613-2404 or email:stoney@centralequipment.net

Part# 24175G Liquid Dyn

23 Gallon Used Oil Drain

$385

Tank Capacity: 24 Gallons

Collection Bowl Capacity: 5 gallons

Min. Working Height: 46″

Max. Working Height: 69″

Discharge Hose Length: 6′

Relier Valve pop-off Pressure: 14 PSI

press to order  (316) 613-2404 or stoney@centralequipment.net

Parallel Female Thread Coupler

$30.67

$31.35

$33.38

A (inch) 2.677 B(inch) 1.181 C(mm) 20 D(-) E(-)  NPT Female Thread 1/4 FNPT Part# ISI 061201

2.835                 1.181                20   -       -                                         3/8            Part# ISI 061202

             3.11                   1.181               23   -       -                                         1/2            Part# ISI 061203

 order  (316) 613-2404 

Hose Stem Coupler

$32.54

$32.54

A (inch) 3.268 B(inch) 1.181 C(mm) 0.764  D(-) E(-) NPT For Hose ID 1/4 Hose Barb Part# ISI 061806

               3.268                1.181              0.764     -       -                                 3/8                     Part#  ISI 061810

 order  (316) 613-2404

Thread swivel Coupler

$117.60

 A (inch)6.772 B (inch) 1.181 C (inch) 4.933 NPT Female Thread 3/8" FNPT Part # ISI 061202SW
(360 Rotation in 2 axes)

 order  (316) 613-2404

Bulkhead Coupler

$53.85

A (inch) 3.307 B(inch) 1.181 C(inch) 29 D (inch) 32

  NPT female thread 1/4" FNPT 0 Drill (in) 1.06 Panel thickness (in) 0.43 Part# ISI062201

order  (316) 613-2404

Female thread single wall manifold - 1 coupler and drain - 1/4" Industrial Interchange

$54.99

A (inch) 2.008 B (inch) 1.969 C (inch) 1.496 D (inch) E (inch) 0.256

INLET NPT Female Thread ( 1/2" FNPT) Outlet 2 couplings (ISI 06) Part# ISI061203WK

order  (316) 613-2404

Female thread double wall manifold - 2 coupler and drain - 1/4" Industrial Interchange

$102

$92.38

 A (in) 2.795 B(in) 2.244 C (in) 1.496 D (in) 2.756 E (in) 0.256

INLET NPT Female Thread (1/2")   ( outlet 2 couplings ISI 06) Part#ISI068203WK

  A (inch) 2.795 B(inch) 2.244 C (inch) 1.496 D (inch) 2.756 E (inch) 0.256

INLET NPT Female Thread (3/4")   ( outlet 2 couplings ISI 06) Part#ISI068204WK

order  (316) 613-2404

Female thread wall manifold - couplers  and drain - 1/4" industrial interchange

$166.20

$236.90

$308

$378.80

A (in            B (in)            C (in)           D (in)         E (in)           NPT Female Thread  Outlet  Part#

          3.071            5.315            2.48           3.15          0.256    3/4" FNPT                 4 x ISI 06    MF 204S4IS

          3.071            7.087            2.48          4.921         0.256    3/4" FNPT                 6 x ISI 06    MF 204S6IS

          3.071            8.858            2.48          6.693         0.256    3/4" FNPT                 8 x ISI 06    MF 204S8IS

          3.071            10.63            2.48          8.465         0.256    3/4" FNPT               10 x ISI 06    MF 204S10IS

order  (316) 613-2404

Female Thread Plug

$ 2.03

$ 4.24

A (in)      B (in) NPT Female Thread  Part#

1.614       178         1/4" FNPT                    IRP066201

1.772        21           3/8" FNPT                    IRP066202

order  (316) 613-2404

Male Thread Plug

$2.03

$2.88

A (in)            B (in)     NPT Male Thread  Outlet  Part#

1.693          14           1/4" MNPT                             IRP066251

1.772          17           3/4" MNPT                            IRP066252

order  (316) 613-2404 

Hose Stem Plug

$1.78
$ 1.78

A (in)         For Hose ID   Part#

1.929        1/4" Hose barb       IRP066806

1.929        3/8" Hose barb       IRP066810

order  (316) 613-2404 

Parallel Female Thread Coupler

$36.84
$36.92

$49.15

A (in            B (in)            C (in)      NPT Female Thread  Outlet  Part#

3.126           1.299           23          1/4" FNPT                                 ISI 081201

3.185           1.299           23          3/8" FNPT                                 ISI 081202

3.539           1.299           23          1/2" FNPT                                 ISI 081203
order  (316) 613-2404 

Male Thread Coupler

$36.43
$42.51

$33.81

A (in            B (in)            C (in)      NPT Female Thread  Outlet  Part#

3.657          1.299           23             1/4" MNPT     ISI 081251                           

3.657          1.299           23             3/8" MNPT    ISI 081252      

3.815         1.299           23             1/2" MNPT    ISI 081253                   

order  (316) 613-2404